|
Post by aerialraider on Oct 9, 2012 7:51:02 GMT -8
I am installing the GPS upgrade on the NAZA. I am running into an issue with my Devo 10. I am Trying to use the MIX switch to toggle between from Home lock, course lock and off. Currently, toggling the switch between positions 1,2 works but no to position 3. I have tried using the travel adjust U and D for the FLAP, it only moves it in one direction on the NAZA setup, it seems.. The sub trim just moves the middle of the position.
Please Help!! :-/
|
|
|
Post by cds1950 on Apr 20, 2013 21:44:29 GMT -8
Have your tried using the FMOD switch?
Sorry I can't be of much help. I have looked at all of my models I have configured in my Devo 10 and I do not see where I set the different values for the Mix switch positions and the amount of gyro gain each position assigns. I will look again and if I find anything better I will post.
Did you have any luck finding this on your own since you posted this?
|
|