|
|
Post by schwarzforest on Oct 8, 2012 9:10:56 GMT -8
I'm having a hard time understanding some parts of the Devo 10 manual. In "Sensor Setting" for "Voltage setting" it explains there are 3 types of voltage that can be measured, Internal 5V, External V1, and External V2. So which one measures my 3700mah lipo battery's voltage? I'm using the Devo 10 with a quadcopter F450.
|
|
|
|
Post by cds1950 on Apr 19, 2013 23:05:34 GMT -8
Sy, I just saw this post.
The Sensor settings are for defining which telemetry items you want to monitor. I assume that when you say an F450 you are talking about the DJI quad-copter, correct? If that is the case then it will not show up unless you buy the Walkera telemetry module and sensors and add them to your F450. Then you can monitor voltages, temp, RPM's and GPS values but not on a stock F450 even with a Devo 10 and 10 channel Rx.
Sorry.
|
|
