Post by cds1950 on Aug 29, 2012 8:44:08 GMT -8
I was looking at the Walkera - Chine web page for upgrades to the various multi-copters and found that there are several version of upgrades for the Space Walker. Trouble is, they are all posted on the same date and the title for each leaves a lot to be desired with no explanation as to what updates even though they all indicate they are for the Space Walker. I emailed Dave at which point he emailed Walkera and got the following reply:
"Instruction about the Space Walker software:
1. QR spacewalker Y6 telemetry: if you change your spacewalker into 6 axis, like Scorpion, and you want it take telemetry technology, this software is ok for you.
2.QR spacewalker Y6 program: if you change your space walker into 6 axis, like Scorpion, and you don't want it take telemetry technology, this software is OK for you.
3. QR space walker X4 telemetry: if you change your space walker into 4 axis, like Ladybird, and you want it take telemetry technology, this software is OK for you.
4. QR space walker X4 program: if you change your space walker into 4 axis, like Ladybird, and you don't want it take telemetry technology, this software is OK for you.
5.QR space walker X8 telemetry: if you don't want to change anything, just want to update the software, and you want it take telemetry technology, this software is OK for you.
6.QR space walker X8 program: if you don't want to change anything, just want to update the software, and you don't want it take telemetry technology, this software is OK for you."
To use any of these does require the UP02 module and the adapter cord that Dave sells.
It looks like there might be a fix so that the Space Walker supports voltage telemetry. It is still not clear to me as to what the Y6 does for the Space Walker or how you configure the motors.
"Instruction about the Space Walker software:
1. QR spacewalker Y6 telemetry: if you change your spacewalker into 6 axis, like Scorpion, and you want it take telemetry technology, this software is ok for you.
2.QR spacewalker Y6 program: if you change your space walker into 6 axis, like Scorpion, and you don't want it take telemetry technology, this software is OK for you.
3. QR space walker X4 telemetry: if you change your space walker into 4 axis, like Ladybird, and you want it take telemetry technology, this software is OK for you.
4. QR space walker X4 program: if you change your space walker into 4 axis, like Ladybird, and you don't want it take telemetry technology, this software is OK for you.
5.QR space walker X8 telemetry: if you don't want to change anything, just want to update the software, and you want it take telemetry technology, this software is OK for you.
6.QR space walker X8 program: if you don't want to change anything, just want to update the software, and you don't want it take telemetry technology, this software is OK for you."
To use any of these does require the UP02 module and the adapter cord that Dave sells.
It looks like there might be a fix so that the Space Walker supports voltage telemetry. It is still not clear to me as to what the Y6 does for the Space Walker or how you configure the motors.