|
Post by madscientist927 on Aug 26, 2012 14:38:06 GMT -8
Can someone help me, I had a WK-2801-Pro and I figured out how to mix channels to control my Naza F450 Flame wheel. I now have the Devo 10 and tried to mix the Gear SW with the Flight Mode (AUX 2) channel. The F-450 has GPS, Attitude, Manual modes in the flight controls. I use the flight mode SW to toggle between these 3 modes. But I also needed a 2 position SW to go into fail-safe mode. on the wk-2801 the gear SW was the master and the Mode SW was the slave so that in any of the 3 modes I could go into fail-safe by pushing the Gear SW. I tried it for hours with the Devo 10 but could not figure it out. Can anyone out there help me out or point me in the right direction.
|
|
|
Post by madscientist927 on Aug 28, 2012 6:56:14 GMT -8
After staying up all night and playing with it I figured it out and got it to work. :-D
|
|
|
Post by majic1 on Aug 28, 2012 7:32:25 GMT -8
To my knowledge, no one has ever needed to mix the fm & gear switches? However, I could be wrong?
+1 On figuring out how to do it!
Please eloborate on how you did it, so you can help other people who might need to do this.
|
|
|
Post by cds1950 on Aug 28, 2012 9:35:14 GMT -8
This sounds interesting to me as well.
First the Devo 10 has a fail safe option built in but I am not sure what causes it to activate fail safe except battery level going too low. Was this not adequate? I see you can use the mix function to have master slave relationships as well.
Your use with the Naza and Flame Wheel is what I am most interested in as I keep looking at those as a possible next step up from the Horten I now have.
|
|