Post by dalibortalajic on Apr 22, 2014 23:14:43 GMT -8
Hi,
I'm a complete newbie in quads and flying and need some advice.
My Walkera x350 fell from 15 meters
Immediately after the fall the quad was normally turning on, the propellers rotated even though the one which the quad fell on couldn't push the drone upward. It is probably bent thus turning more slowly and/or in the wrong direction?
From the next day on, I'm unable to unlock the motors using the usual command on the Devo F7. Everything seems to work: the calibration is ok, the GPS turns on and the compass flickering works - so the quad and the transmitter are in contact - but the motors wan't unlock. The left red light doesn't turn on.
Thanks a lot for any help!
I'm a complete newbie in quads and flying and need some advice.
My Walkera x350 fell from 15 meters
Immediately after the fall the quad was normally turning on, the propellers rotated even though the one which the quad fell on couldn't push the drone upward. It is probably bent thus turning more slowly and/or in the wrong direction?
From the next day on, I'm unable to unlock the motors using the usual command on the Devo F7. Everything seems to work: the calibration is ok, the GPS turns on and the compass flickering works - so the quad and the transmitter are in contact - but the motors wan't unlock. The left red light doesn't turn on.
Thanks a lot for any help!