|
Post by justwannafly55 on Feb 14, 2014 13:42:04 GMT -8
Problems removing pin from the rotor head on my V120DO2S ... How do you change it out ... look straight forward but not budging for me ... Is it locked in with red or ca any pointers thanks Jim B
|
|
|
Post by justwannafly55 on Feb 17, 2014 18:27:23 GMT -8
can any one help me with this pin ... or i guess the answer would be to grab it with pliers twist and pull carefully ??
|
|
|
Post by tugboat001 on Sept 25, 2014 9:46:22 GMT -8
I just did mine and the old pin is thread locked in. but yes to remove it look at the pointy end. thats the end you want to push. a good small pair of hardened steel wire cutters. and work at it slowly pulling it out.
|
|
|
Post by acotesawi on Nov 7, 2019 14:38:14 GMT -8
|
|