|
Post by cds1950 on Oct 11, 2013 21:52:17 GMT -8
Don't know if anyone has tried the Return TO Home function on the QR X350 yet but I noticed a strange characteristic or so I thought. After it lands it is in motor lock and it almost won't unlock. It does but it very quickly relocks. I asked Walkera Technical Support if that was a bug or a design feature. Their response is that it is a safety measure. The easiest way to clear it is to unplug the battery and plug it back in. I played with it for several minutes and did find I could unlock and give throttle almost at the same time and I could get it to stay unlocked but it is easier just to unplug the motor and start over. For those that have trouble getting their Tx and Rx to bind, sorry. It does means to turn your receiver off and start that process all over.
I have not had any trouble with my Devo 10 and the RX701 in the X350 binding at all. Maybe I am so used to the binding process that I get lucky all the time. I still have trouble with my Ladybird.
|
|
|
Post by bobsdivco on Dec 16, 2013 9:29:48 GMT -8
The only time I have trouble with the relocking problem is when I forget to return the MIX switch to the 0 position. It will continue to relock all day if the switch is left in the return to home mode. Hope that helps!
|
|
|
Post by cds1950 on Dec 19, 2013 22:39:36 GMT -8
Good point. I didn't pay any attention to where I left that switch.
|
|