|
Post by cds1950 on Sept 29, 2013 19:17:09 GMT -8
The User Manual for QRX350 has a couple of critical errors in it. Section 4.3 Motor unlock/lock Stop rotating. The lock and unlock instructions are switched. Use the lock instructions to unlock the motors and the Unlock instructions to lock the motors. Section 4.4.1 Compass Calibration. It says for MODE 2 that the throttle stick should be moved to the highest point and left side. I found it required the throttle to be moved to the highest point and to the right side.
|
|
case
New Member
Posts: 25
|
Post by case on Dec 11, 2013 14:09:34 GMT -8
Section 10.1.2 of the user manual on the CD that comes with the QR X350 states to set the "Type" to HELI. The quick start guide "Paper" that comes with the QR X350 states to set "Type" to AERO. When you set it to HELI you are not allowed to set the output of the channel that controls IOC, hence, it will not work. But if you choose AERO you can set the channels out, and IOC works perfectly. Hello Walkera
|
|