|
Post by sefrez on Jun 27, 2013 2:19:32 GMT -8
I was under the assumption that my Devo 10/Hoten X, before shipment was upgraded to the latest firmwares. I believe Dave said he would do this. I checked the Devo 10, and it has indeed been updated to the latest firmware (v0.7B/v0.2). I do not have the UP02 adapter and so cannot check the Hoten's firmware version.
Anyway, I have gone through on the Devo 10 and enabled the telemetry functions, but on the sensor view page it simply says "inhibit". This is after I have bound the Devo to the Hoten. I have tried enabling all the voltage readings in the sensor settings and still nothing. In fact, there is supposedly an internal voltage monitor. I am not sure what this refers to, but it also displays as "inhibit" in the sensor view.
Does this sound like the Hoten has not be upgraded to support telemetry, or a setup problem?
|
|
|
Post by cds1950 on Jun 27, 2013 16:08:18 GMT -8
It doesn't sound like it. On my Horten X it shows up as the external voltage #2 not the first external voltage. I did have upgrade my Horten firmware to get it working. I wonder if they leave it that way to reduce voltage consumption for those that don't want telemetry. Not sure. Dave does sell the UP02 setup. It is a two part affair. It looks complicated but it is easy once you have done it. Contact me if you have questions about it.
Good luck. Dale
Sent from my DROID RAZR using proboards
|
|