|
|
Post by chris0427 on Mar 25, 2013 18:06:35 GMT -8
Hello i have the Devo F7 and am trying to figure out how to get my gopro hooked up to 5801 fpv ....i need help ...i bought the go pro fpv cable, but it comes with a regular reciever pin to hook into a 2.4 reciever...im soo confused!!!!!!!!
|
|
|
|
Post by cds1950 on Mar 25, 2013 21:10:38 GMT -8
Welcome to the forum. I do not have either the FPV transmitter or the Devo 7 radio but I did some looking on the Walkera web site and I think I have found the help you need. walkera.com/en/showgoods.php?id=1649 at the bottom of the page. Make sure you go down to the last frame that shows the DEVO4 camera and talks about turning it on. When they talk about using the gear switch my assumption is that it is the gear switch on your TX. On my Devo 10 I have to enable the Gear switch so I assume you have to do the same. The nice thing about the gear switch is that it is a two position switch. If you need more positions then you need to find one of your AUX channels that supports what you need. You will also need that standard servo extender. It has female connectors on both ends so it can plug into your GoPro and the control board. Let me know if this makes sense and if it works. Good luck. Dale |
|
|
|
Post by cds1950 on Apr 13, 2013 21:57:48 GMT -8
Just found a video on YouTube that talks about the GoPro plug and how to use it in a three wire servo type connector. Maybe this will help you out. www.youtube.com/watch?v=MBzRRGBWcrwHope this helps and please let us know how it goes for you using the GoPro. My end goal is to get a GoPro Hero 3 Black some day.  Dale |
|
