|
|
Post by diggerishere on Mar 10, 2013 12:16:39 GMT -8
I have a new V120D02S with a Devo10 TX.
|
|
|
|
Post by cds1950 on Mar 12, 2013 19:35:51 GMT -8
Didn't I see a post from you about servo travel and the Devo 10? I did find it on my Tx. Make sure you have the model selected that you are going to modify. Select "Function Menu" with the ENT button. Go down to "Travel Adjust" and pick the one you want to change. Pretty easy. Hard part is deciding how much. You might want to look into other issues as I have never had a boom strike on any of my factory setup helicopters. Maybe blades need tightening or something else?  |
|
|
|
Post by diggerishere on Mar 19, 2013 4:57:29 GMT -8
This is my first Helicopter and TX ,so setup is a little hard. The Travel Adjust and pick the one to change. You hit it right on, that was just what i needed to do. Thank You for taking the time to help. I worked out the rest of the programing last night. Hope to try it out soon. Thanks agin and have a great day.
|
|
