thorq
New Member
Posts: 1
|
Post by thorq on May 2, 2015 14:46:52 GMT -8
Just playing with the devo f12e and naz32 full version is possible, works verry fine with the databus and neo6 gps module.... i'm starting to build a quadrotor with 5208 360kv motors, controlled by the naze32, i like to share some ideas about the building of this quad. the nice part is that the tx is the Devo f12e and the rx705..gives plenty of room for experimenting . if someone is interested in the project..... i'm glad to share....
|
|
repli
New Member
Posts: 1
|
Post by repli on Jul 26, 2015 23:51:19 GMT -8
Just playing with the devo f12e and naz32 full version is possible, works verry fine with the databus and neo6 gps module.... i'm starting to build a quadrotor with 5208 360kv motors, controlled by the naze32, i like to share some ideas about the building of this quad. the nice part is that the tx is the Devo f12e and the rx705..gives plenty of room for experimenting . if someone is interested in the project..... i'm glad to share.... I am waiting for my naze 32 Full to arrive for a Racing quad build. Got the Devo F12E, still stock firmware on it - DeviationTX is still working on the final implementation (www.deviationtx.com). I have an RX705 on my other quad (Walkera QR X350 Pro) with good results regarding telemetry data being packed to the radio protocol without any need for an OSD onboard. Therefore, I am looking at ways of getting an RX705 onboard the racing quad as well, and matching it to the Naze32 Full and my Devo F12E, with as much telemetry data packed into the radio transmission as possible. Any idea how this can be implemented? In the naze32 Wiki it says the Naze controller is most often matched to FrSky receivers to implement telemetry, but a FrSky will not easily bind to the Devo F12E without any mods, I guess...
|
|