|
Post by tugboat001 on Sept 13, 2014 17:08:53 GMT -8
I posted on another thread but will repost here to on a thread just for this. I am new to rc hellicopters because i never had the time.(now retired) But if the wife forgets the hunnydo list then i am good. I have a 120d02s and had a few good crashes in the house. 1 of which too out a servo gear. Now the ussual remedy is to get a new servo. But in order to get back in the air here is what i did (takes less than a half hour) remove the servo and dissasemble it. The front comes off easy. Now remember where the gears go before you start. you are looking for the stripped teeth and where they are in relation to eveything else. now you want to get the main shaft out and turn it 180degrees. make sure the stripped part is 180degrees away from where they would make contact. put it all back together. REMEMBER this is not permanent. You will still need a new servo. I have 3 coming.. These little Helli's take a beating. 1 crash i thought OMG it's done! But put it down and it was back in the air. Just had it outside and it was dark out couldnt see too well but WOW i cant wait till tomorrow! Be safe too these will draw blood(ask my hand) Happy flying. And minnimal crashes. even the Pro's crash!!!!!!
|
|