russ
New Member
Posts: 3
|
Post by russ on Dec 19, 2013 4:45:42 GMT -8
Got new board for ladybird , upgraded it to 1.1 version and it died , no led , nothing when plugged battery in , says on up02 tool ladybird b2 v1.0 found , think walker a have again put out new board and software with no new update , tried contacting walkera :-/and they sent a ntx v1.0 file , that does nothing either , any help or links to software for this new ladybird board would be much appreciated , cheers
|
|
|
Post by cds1950 on Dec 19, 2013 22:23:16 GMT -8
Version 1.1 of firmware was for the version 1 of the Ladybird. It does not work for the version 2 of the ladybird. They changed the receiver on V2 and removed the accelerometers. If someone has a Ladybird V2 then they could upload the firmware from the Ladybird and send it to you to install. I will look around and see if anyone I know has a copy.
|
|
russ
New Member
Posts: 3
|
Post by russ on Dec 20, 2013 10:47:02 GMT -8
It is version 1 board of ladybird with accelerometers , v2 board is half the price as well , problem is when you plug in up02 tool it says ladybird B2 v1.0 found , need software link please for this new board , even though it is still called rx 2634h-d , thanks
|
|
|
Post by cds1950 on Dec 21, 2013 16:40:46 GMT -8
Just got word back from the Walkera Factory and you are not going to like the answer. Here it is "Once you upgraded your QR ladybird V2, your IC inside it has been damaged , even V1.0 is not useful again . As QR ladybird V2 can not be used by UP02 upgrading ." The last part was in response to me asking if you could download the original firmware (V1) back into the V2 board to make it work so I guess not.
|
|
russ
New Member
Posts: 3
|
Post by russ on Dec 22, 2013 1:03:07 GMT -8
It's not a v2 ladybird , it's a v1 ladybird I have with accelerometers and telemetry . The up02 tool shows ladybird B2 V 1.0 found when you plug it in which is different from before which said ladybird v1.0 found , this new B2 version is what I now have that the 1.1 upgrade killed , walkers made it , so they must have original software for it somewhere , me and others out there with this problem are all trying to find it , hoping you might help , thanks , someone posted in the deviation forum , who has same problem , that the original v1 ladybird has the atmel XMEGA32 A4 microprocessor and this new one has the atmel XMEGA32 D4 microprocessor in it , if this is any help ? Cheers
|
|
|
Post by macgyverek on Dec 28, 2013 11:36:17 GMT -8
I writening this post in few forums ...I have the same problem... This is my movie with the problem:
I have Walkera v120d02s, Ladybird V1 (now die), DEVO 7e, DEVO8S....and Walkera can't help me...I am a Walkera's customer!!!! This is the last product I ever bought from WALKERA.... They should send a new board for free with apologyse. There is no guaranty, no service...Pooor pooorr pooor.
I am on few forums and I will be "recommend" Walkera's product - negativ of course!!!! They told me (girl CICI in Walkera's "support" (big joke)) that I must buy new board. Price is without any discount - 54$!!!!!)
Another about support - they don't (CiCi) what is a differences between Ladybird V1 and V2 board.
I am a designer electronic board and I writing firmware for heating devices. I know my product and what I have (firmwares, board), version etc). Walkera don't know what sells, what have!!!!!
I am from EU and people saying - week Chines product. Never ever!!!!!!!!!! I starting writing a post on forum about this!!!!
P.S. Walkeras send me a ntx v1.0 file too...Not working!!!!!!!
|
|
|
Post by macgyverek on Jan 13, 2014 2:34:55 GMT -8
This is a conversation with Walkera: Hello. Cici I have a information for you... I ordered new board for my Ladybird V1 (not brom Banggood) From Hobbyking Europe UK. I connect a board to my UP02 dongle and check a version...Once again I have B2 version (new board have a ID QR LADYBIRD B2. 2 differens source (Banggood and Hobbyking) and Ladybird B2!!!! [09:05:44] Adam: There is any options for download a firmware from board (not to board). [09:06:24] Adam: I thinking about download a firware from my new working board and reflash firmware to broken board. [09:06:53] Adam: Could you ask R&D about download a firmware. [09:07:12] Adam: Off course I will send you a firmware copy to you [09:20:56] Cici: The QR ladybird V1 can not be upgrade [09:21:16] Cici: if you insist on using the UP02 to get it upgarded [09:21:24] Cici: the firmware will be damaged [10:01:42] Adam : V1 csn not upgrade?? V2 cannot upgrade [10:01:56] Adam : V1 can upgrade - there is upgrade port [10:05:01] Cici: this port is not for upgrading [10:05:09] Cici: i told you before you make me confused [10:32:03] Cici: i show you video to certificte that the V2 has no problem in upgarding [10:32:26] Cici: and , now , you ask me again about the V1 [10:36:42] Cici: (facepalm) [10:37:18] Cici: QR laybird V2 has upgrade port is surely for upgrading [10:37:27] Adam: haahahhaahahahahahahahahaha [10:37:44] Cici: QR ladybird V1 also has upgarde port which is not for upgrade [10:37:47] Cici: OVER [10:37:50] Cici: ! Support is very good!!!!!!!!!!!!!!!!!!!!!
|
|