|
Post by rfg1022 on Oct 5, 2013 14:46:03 GMT -8
My QR during take off wants to constantly spin 360 I tried to adjust the trims etc with no luck. Also all my props are spining in the right directions. Any ideas
|
|
|
Post by cds1950 on Oct 5, 2013 19:41:19 GMT -8
Only one. Is the QR setting on the floor in a flat and level place during the binding process? It should be. That's it. This is a generic 3 axis gyro thing not just Infra X specific.
Sent from my DROID RAZR using proboards
|
|
|
Post by cds1950 on Oct 6, 2013 11:07:25 GMT -8
I did not mean to imply that what I posted was your answer. Since I do not have an Infra X I was just telling you what I know about the 3 axis gyro's in general as it relates to unexpected flight characteristics.
If you cannot resolve the issue I would go back to the shop you bought it from and see if they can help you out. There are so many parts and interactions on these new RC aircraft that there could be a broken something and it would be impossible to isolate it on your own. You would be amazed at what they have on that receiver board.
Good luck and let us know how it goes.
|
|