|
Post by cds1950 on Aug 10, 2013 21:53:11 GMT -8
How to switch between the 3-AXIS to 6-AXIS mode or vice verse? I'm using the Devo-10 controller. Can you help to instruct in details? Thank you!
|
|
|
Post by cds1950 on Aug 12, 2013 13:00:28 GMT -8
After checking with the Walkera Support I was told that the selection has to be done on the receiver. There is a switch on top that is used to switch between 6 and 3 axis mode. It cannot be done via the transmitter.
|
|